Cleaning & Maintenance Tips

• Turn and place the top of the burner face down
• Pull out all wicks and discard short ones
• Remove clamp (No.1) and ring (No. 2), and lift up the wick plate (No.3)
• Clean every dirty tube (No.4) and every hole on the burner (No.5) with a scrub brush
• Once done, reattach the wick plate, clamp, and ring
  

How to re-install wicks:

• Make sure every wicks are thick enough to not drop into the tank
• Clip the wired wick to make wick pulling easy
• Place the wick on the bottom wick plate, and pull the wick upwards into the pipe, with a maximum of 1,5cm(regular and hybrid) and 0,5-2cm (biosolar type) from the other wick end.
  

Note: An overused wick will cause burnt, dirty, and short wick end, which prevents flame to light up. To clean the wick, pull the wick (burnt side) upwards with a clamp, cut and adjust with 1,5cm height (regular and hybrid) and 0,5-1cm (biosolar type) from the other wick end.

Stove Body

Use a rough cleaner sponge to clean dull body surfaces.

‍